Water Conservation Using Half Pool Covers

Revolutionary Use of Half Pool Covers

Every year swimming pools are wasting billions of gallons of water that can be saved. This paper addresses the problems with the current use of full pool covers and how half covers are the solution to pool water conservation.

It is well known that pool covers can reduce water evaporation by up to 95%, yet less than 30% of pools are using covers. The current limitations imposed by full covers for the most part boils down to two problems.

The Twofold Problem

First, full covers are difficult to stock. Full covers are bulky and must be stocked in 50 or more sizes requiring a sizable amount of floor space to have covers on hand for the myriad of pool sizes. If a size goes out of stock, the customer has to wait until the warehouse reorders another truckload of covers. This distribution and stocking problem severely limits the available stock on hand at any one time and prevents the customer from being able to purchase on demand.

Second, full covers for the most part fit only rectangular shaped pools. Covers initially come off the production line as sheets in rectangular shapes and are heat seamed together for various widths. They can be further cut into oval or round sizes, but nevertheless most of the pools built today are irregular free-form shapes and custom designs. In order to accommodate free-form pool shapes the customer many times must oversize the cover which means ordering an even larger than needed cover and cookie-cutting the cover to the free-form pool using the inside of the pool cove as a guide. This however can create a lot of waste. And how do you accommodate say an L-shape pool?

The twofold solution is that by using half covers, the number of cover sizes for distribution and stocking can be reduced from over 50 to just 4 half cover sizes (see below) which can be mixed-n-matched to work with almost all pools up to L-shapes solving both of the aforementioned issues.

Encouraging the industry to distribute half covers allows more people that ever to cover their pools. This practical way of using half covers revolutionizes the way covers are stocked and distributed, never incurring oversize shipping charges, and allows dealers to have covers in stock so pool owners never go home empty handed. By solving the problems preventing all pools to use covers, in the wake of water shortages that are only getting worse, it becomes a mandate to encourage all pools to be covered.

The Added Problem with Handling Full Covers

Another overwhelming limitation to full cover usage is that historically the only device sold for handling these covers has been the deck reel, an expensive bulky towel rack like device that sits at the end of the pool consuming valuable deck space. The problem with deck reels is that even if you cookie-cut your over-sized cover to fit your free-form pool, deck reels do not handle curvy free-form pool covers very well. Also if you have limited or no deck space where are you going to put your reel?

That said, as things stand today, only pools that can accommodate a deck reel have a solution for taking the covers on and off the pool, which is much like having invented breakthrough inflatable rubber tires for the auto industry, but no jack to remove them with on 70% of the cars.

For all those millions of pools without a jack, there is an innovative hk pools  half cover rolling solution that can assist in the removal and handling of covers for pools that can’t use a deck reel. Because most custom free-form pools cannot use a traditional deck reel, many of those pool owners are already splitting their bulky pool covers to make them easier to remove by hand, and are doing so at the advice of pool shops who want to sell them a cover, but cannot sell them a reel. The half cover rolling device just takes this a step further, and makes it possible for custom free-form pool owners who want to purchase a cover to have a means to handle the cover too.

The Industry Change to Half Cover Distribution

As mentioned above to be expounded on here, distribution of full pool covers today is a nightmare for distributors because full cover distribution requires a multitude of covers sizes to support the many different size pools out there. Enabling custom shaped pools to use half pool covers, the plan is to revolutionize the way covers are distributed, lowering the cost for everyone and making stock on hand a top priority to solve the problem with special ordering or waiting for a cover to come in stock.

Four Sizes: Employing the revolutionary strategy to provide half pool covers will solve this problem to support the majority of pools under 20x40ft. By shifting to the four size distribution model, half cover sizes (14×14, 16×16, 18×18, 20×20) can be mixed and matched to each half of the pool. Furthermore, online internet retailers can ship the lighter more compact half cover sizes, avoiding dreaded overcharges due to weight, making shipping costs more predicable and controllable. For handling the covers, stores can provide the lightweight compact half cover roller device that currently ships coast-to-coast at a fraction of the cost of the heavier/bulkier deck reels which require two boxes. For anyone doing business over the internet, shipping lighter and more compact half covers alone is a remarkable dollar saving breakthrough.


Leave a Reply

Your email address will not be published. Required fields are marked *